|
1. Click
the hard drive icon on your desktop, and then
click the "Applications (Mac OS 9)",
"Utilities" and
"Assistants" icons as they appear in
that order.
2. Within the "Assistants"
section, click the "Internet Setup
Assistant" icon, which will initiate the
setup process for the dialer program.
3. For the "Would you like to
setup your computer to use the Internet?"
option, click "Yes". For the
"Do you already have an Internet
account?" option, click the
"Yes" button.
4. After reviewing the Introduction
section that follows, click the right arrow
button in the bottom right corner. For the
"What would you like to name this
configuration?" option, type the word
FireFly.
5. For the "How will you be
connecting to the Internet?" option,
select "Modem", and click the right
arrow button in the bottom right corner. For
the "Which modem are you using?"
option, select "Apple Internal 56K
Modem".
6. For the "Which port is the
modem connected to?" option, select
"Internal Modem". For the "Does
your phone line use tone or pulse?"
option, select "Tone". For the
"Ignore dial tone?" option, leave
this box unchecked, and click the right arrow
button in the bottom right corner.
7. For the "What is the access
phone number for this configuration?"
option, type the FireFly dialup number that is
local to your area. FireFly's dialup numbers
can be found at http://www.fireflyuk.net/support
8. For the "What name do you use
with this service?" option, type your
FireFly username, exactly as it appears in
your confirmation email.
9. For the "What is your
password?" option, type your FireFly
password, exactly as it appears in your
confirmation email. Click the right arrow
button in the bottom right corner.
10. For the "Does your ISP require
that you use a PPP Connect Script when you
login?" option, select "No",
and click the right arrow button in the bottom
right corner. For the "Is there an IP
address for this configuration?" option,
select "No", and click the right
arrow button in the bottom right corner.
11. Leave the two fields in the
"Domain Name Servers" setup area
blank, and click the right arrow button in the
bottom right corner. For the "What is the
e-mail address for this configuration?"
option, input your FireFly email address (yourusername@fireflyuk.net).
12. For the "What is the e-mail
password for this configuration?" option,
input your FireFly password, and click the
right arrow button in the bottom right corner.
13. For the "What is the e-mail
account for this configuration?" option,
input your FireFly username along with our @mail.fireflyuk.net
address. For example, if your username is
fred123, input as fred123@mail.fireflyuk.net
14. For the "What is the e-mail
host for this configuration?" option,
type our smtp.fireflyuk.net address, and click
the right arrow button in the bottom right
corner.
15. For the "NNTP(Network News
Transfer Protocol) host" option, type our
supernews.fireflyuk.netaddress, and click the
right arrow button in the bottom right corner.
For the "Do you use proxy servers for
Internet connections?" option, select
"No", and click the right arrow
button in the bottom right corner.
16. You should now see a Conclusion
message, that confirms the setup of your
Internet Setup Assistant. Uncheck the option
"Connect When Finished", and click
the "Go Ahead" button.
17. To start your Internet connection,
click the "Remote Access" button
within your toolbar strip on the desktop.
Select the "Connect" option in the
pop-up menu. This will dialup your modem,
verify your username and password, and connect
you to the Internet. |
